Today I had to do an imaging of a 2014 GMC Terrain, which is a supported vehicle. It should be a easy one, since it was a DLC. I had everything right, module, cables, ignition key, etc... Did the test, everything was working, but after pass 2, I got the error message:
This vehicle module is not supported.
Software ID not recognized.
ID: CE44D6
I looked into ARserchengine.com and crashforum.info and this error ID didn't come up anywhere. Just to make sure our CDR module was working I did a test download in another vehicle and didn't get any error, got the CDR report.
Can anybody help me figure it out? I'm new to CDR imaging.
Error CE44D6
- emvanderpol
- Posts: 2
- Joined: Wed Nov 02, 2016 1:21 pm
- First Name: Patricia
- Last Name: Swillens
- DPatrickRyan
- Posts: 84
- Joined: Mon Jan 16, 2012 10:15 am
- First Name: Patrick
- Last Name: Ryan
- Location: Calgary, AB & St. John's, NL
- Contact:
Re: Error CE44D6
I've seen this referred to in one other case, involving a 2016 GMC Yukon. Call Bosch tech support and pass it along - it's probably one of a batch of overlooked/broken SWID's. Also, what version of the software are you running? They just released 17.1, so it might now be fixed.
D. Patrick Ryan, P.Eng. - Graham Ryan Consulting Ltd.
#34, 11410 - 27 Street SE Calgary, AB T2Z 3R6
Phone: (403) 290-1150 Fax: 290-0659 Cell: 651-8340
#34, 11410 - 27 Street SE Calgary, AB T2Z 3R6
Phone: (403) 290-1150 Fax: 290-0659 Cell: 651-8340
- emvanderpol
- Posts: 2
- Joined: Wed Nov 02, 2016 1:21 pm
- First Name: Patricia
- Last Name: Swillens
Re: Error CE44D6
We are using the version 17.1. I called Bosh and they quickly told me what it was. The 2014 GMC Terrain was not supported because it was made in Mexico! The VIN number started with a "3" and the market for this vehicle is "4"! So, that specific GMC Terrain is not supported.